AVM FRITZ!Box 7590 AX - Connecting Door Intercom Systems

Connecting a Door Intercom System
Overview
Door intercom systems with an a/b interface and IP door intercoms
can be connected to the FRITZ!Box. Then you have the following
options:
• You can answer the doorbell on your telephones, speak with visi-
tors, and open the door, even on a mobile telephone or another tele-
phone connection away from home.
• You can have the camera image from your door intercom system
displayed on FRITZ!Fon telephones with a color display.
• You can configure a special ringtone to signal the doorbell on a
FRITZ!Fon.
Supported Door Intercom Systems
• Door intercom system with an a/b interface that uses DTMF (dual-
tone multi-frequency signaling) tone dialing.
• IP door intercom systems that can be configured as SIP clients (by
entering the login data for a SIP registrar).
Instructions: Connecting a Door Intercom System with an a/b Interface
1. In the user interface of your FRITZ!Box: Configure the door
intercom system; see page87.
2. Connect the door intercom system to a FON 1 or FON 2 socket.
Note: One FON 1 socket must remain free (not allocated).
Instructions: Connecting an IP Door Intercom System
1. Connect the IP door intercom system to the FRITZ!Box using a
network cable or Wi-Fi.
2. Configure the door intercom system in the FRITZ!Box user inter-
face; see page87.
FRITZ!Box 7590 AX 84
Connecting Telephones
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •