Selecting Signaling of the “Info” LED
Overview
The Info LED signals various events. Some events are preset and con-
figured permanently; see page26. In addition to this, the Info LED
can be assigned to display another event of your choice.
Example 1
You would like to be notified about new messages on the answering
machine. The Info LED flashes when there are new messages on the
FRITZ!Box answering machine. The LED stops flashing as soon as all
new messages have been heard.
Example 2
You would like to be notified when the data or time included in your in-
ternet package, stipulated in the Internet > Online Monitor > Online
Meter, has been exhausted. The Info LED will then flash when the con-
figured volume has been exceeded.
Instructions: Selecting the Signaling of the 'Info' LED
1. Open the user interface; see page56.
2. Click on System > Buttons and LEDs > Info Display in the menu.
3. For instructions, open the online help .
FRITZ!Box 7590 AX 214
User Interface: System Menu
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •