AVM FRITZ!Box 7590 AX - Changing IPv6 Network Settings

Changing IPv6 Settings
Overview
The FRITZ!Box has preconfigured IPv6 settings upon delivery. You can
change these settings.
Requirements
• The IPv6 support enabled setting is enabled under Internet > Ac-
count Information > IPv6 in the FRITZ!Box user interface.
Factory Settings
The following IPv6 settings are configured in the FRITZ!Box upon deliv-
ery:
IPv6 Property Setting
Unique Local Addresses (ULA) As long as there is no IPv6 internet
connection, the FRITZ!Box assigns
unique local addresses to the net-
work devices so that they can com-
municate with each other.
Additional IPv6 routers in the
home network
This FRITZ!Box provides the default
IPv6 connection. Other IPv6 routers
are disregarded.
DNSv6 server in the home net-
work
Also announce the DNSv6 server
via router advertisement.
DHCPv6 server in the home net-
work
The DHCPv6 server is enabled. On-
ly the DNS server is announced via
DHCPv6.
You can change the settings. For more information on this subject, see
the online help of the FRITZ!Box.
Instructions: Changing the IPv6 Settings
1. Open the user interface; see page56.
FRITZ!Box 7590 AX 153
User Interface: Home Network Menu
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •