AVM FRITZ!Box 7590 AX - Using USB Storage and Devices

Using USB Storage and USB Devices on the FRITZ!Box
Overview
The FRITZ!Box has two USB ports to which you can connect various
USB devices and operate them as network devices. All devices in the
FRITZ!Box home network can use these USB devices jointly and simul-
taneously.
Supported USB Devices
The following USB devices can be operated on FRITZ!Box as network
devices:
• USB storage formatted for EXT2/3/4, FAT, FAT32, exFAT or NTFS
- flash drives
- external hard drives
- card readers
• USB printers, USB all-in-one printers, USB scanners
• USB mobile network modems
- Android smartphones (USB tethering)
- USB mobile network dongles
• USB hubs
Please Note
• USB devices with power consumption of no more than 900mA can
be connected directly to the FRITZ!Box. If the power consumption of
the USB device is higher, connect the device to the FRITZ!Box via an
active USB hub.
• Do not perform any updates for USB devices that are connected
with the computer via the FRITZ!Box USB remote connection.
• The FRITZ!Box cannot protect itself from voltage peaks and drops
during an electrical storm and can result in data losses on USB
storage media. You should back up the contents of your USB stor-
age media on a regular basis.
FRITZ!Box 7590 AX 164
User Interface: Home Network Menu
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •