3. The FRITZ!Box is displayed in the overview with the Mesh
enabled symbol. If the symbol is also displayed for
the FRITZ!Powerline, then Mesh is already enabled for
the FRITZ!Powerline. If the symbol is missing next to the
FRITZ!Powerline, continue with the next step.
4. Press button on FRITZ!Powerline to establish a connection:
FRITZ!Powerline Model Connection Button
1260E Connect
1240E, 546E, 540E WLAN/WPS
After the button is released, all of the LEDs on FRITZ!Powerline
flash.
5. Within 2minutes, start WPS on the FRITZ!Box. Do this by
pressing the Connect/WPS button until the Info LED starts flash-
ing.
Mesh is enabled and the FRITZ!Powerline is displayed in the overview
marked with the Mesh enabled symbol.
FRITZ!Box 7590 AX 92
Mesh with FRITZ!
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •