118 DSView Installer/User Guide
• Preemption Level - Effective user preemption level for the user that is connected to the target
device session. See Preemption Levels on page 20 for more information.
See Using the Customize link in windows on page 14 for more information.
To display information about active sessions:
1. From the DSView Explorer, click the Units tab. Units will automatically be selected in the top
navigation bar.
2. From the side navigation bar, click Active Sessions. The Active Sessions window will open.
3. Click on the name of an active session in the Start-Date-Time column. The Active Session
Information window will open.
4. Click Close to close the window and return to the Active Sessions window.
To remove an active session from the Active Sessions window:
NOTE: Removing an active session from the Active Sessions window does not disconnect the session.
1. From the Active Sessions window:
To remove a single session from the window, click the checkbox to the left of the session.
-or-
To remove all active sessions from the window, click the checkbox to the left of Start-Date-
Time at the top of the list.
2. Click Remove. A confirmation dialog box will appear.
3. Click OK to remove the active sessions.
-or-
Click Cancel to cancel the action.
To disconnect an active session:
NOTE: This procedure is valid on the following managed appliances: DS1800 digital switches, CPS appliances,
CCM appliances and DSR switches.
A user or member of a user group may disconnect a session only if the Reboot Appliance and Disconnect
Sessions unit access right is enabled for that user/user group. See Changing Unit Access Rights on page 91 for
more information. Additionally, to disconnect a session, the user’s preemption level must be higher than the
preemption level of the active session user.
1. From the side navigation bar, click Appliance Settings.
2. Under Appliance Settings, click Sessions. Active will automatically be selected in the side
navigation bar and the Appliance Sessions window will open.
3. To disconnect one or more sessions, click the checkbox to the left of the sessions you wish
to disconnect.
-or-
To disconnect all sessions, click the checkbox to the left of Server at the top of the list.
To Next Page
Loading...