218 DSView Installer/User Guide
2. From the side navigation bar, click BMCs. The Appliance BMC Ports window will open.
3. Click the checkbox to the left of the BMC you wish to delete.
-or-
Click the checkbox to the left of Name at the top of the list to select all BMCs listed in the
window for deletion.
4. Click Delete. A confirmation dialog box will appear.
5. Click OK to delete the BMCs.
-or-
Click Cancel to cancel the action.
Displaying Sensor Information Using the IPMI Viewer
The IPMI Viewer window is used to graphically display reported sensor information in the
DSView management software. When you click IPMI Session in a Unit View window, the IPMI
Viewer window appears in a separate web browser window.
The information graphically displayed using gauges in the IPMI Session window may vary
between IPMI 1.5 target devices, due to the type of sensors in the BMC. For example, if a BMC
does not contain a sensor that displays voltage information, that gauge will not appear in the IPMI
Viewer window. You may specify how often information is refreshed in the IPMI Viewer window.
Launching an IPMI Viewer session
An IPMI session is launched from the DSView Explorer or using the Unit Overviews window.
To launch an IPMI session from the DSView Explorer:
1. Display a target devices, Units in Site, Units in Custom Field, Topology or Recently Accessed
Units window. See About Unit Views on page 73 for more information.
2. Click the IPMI Session link in the Action column of the target device you wish to view. The
IPMI Viewer window launches in a new web browser window.
To launch an IPMI session using the Unit Overview window:
1. Display a target devices, Units in Site, Units in Custom Field, Topology or Recently Accessed
Units window. See About Unit Views on page 73 for more information.
2. Click on the name of a target device connected to a DSI5100 appliance. The side navigation
bar will contain the name of the target device at the top and Overview will automatically be
selected. The Unit Overview window will open.
3. Click on the IPMI Session name or icon.
The IPMI Viewer window launches in a new web browser window.
IPMI Viewer Window Features
Figure 8.1 shows the IPMI Viewer window areas.
To Next Page
Loading...