Chapter 3: DSView Software Servers 65
6. Type the members attribute. The default value is member.
7. Click Save to save your changes.
8. Click Close. The User Authentication Services dialog box will appear.
To change user browsing settings for LDAP external authentication services:
1. From the User Authentication Services window, click the name of the LDAP service. The side
navigation bar will change to include the name of the LDAP service at the top and, below the
name, the information you may define.
2. From the side navigation bar, click User Browsing. The Authentication Service User Browsing
- LDAP window will open.
3. Click Browse Anonymously to browse users on the external LDAP authentication server.
-or-
Click Browse with User Credentials to browse users on the external LDAP authentication
based on credentials configured on the server. If this option is selected, do the following:
a. Type a log in ID in the User Name field, in one of two forms: a fully qualified
distinguished name or the username of an account in the base user DN.
b. Type the password for the LDAP user account in the Password field.
4. Click Save to save your changes.
5. Click Close. The User Authentication Services dialog box will appear.
To remove authentication services:
NOTE: Only user administrators and DSView software administrators may remove authentication services. The
DSView internal authentication service may not be removed.
1. From the User Authentication Services window, click the checkbox to the left of the
authentication service(s) you wish to delete.
-or-
Click the checkbox to the left of Name to select all external authentication services listed in the
window for deletion.
2. Click Delete. A confirmation dialog box will appear.
3. Click Yes to delete the external authentication service(s).
-or-
Click No to cancel the action.
Managing Spoke Servers
Information on the hub server is replicated on the spoke server. The spoke server’s information,
such as its IP address, port number and certificate, is stored in the hub server’s database.
To Next Page
Loading...