Chapter 6: Using the Video Viewer 161
Session time-out
A remote session may time-out if there has been no activity in a Session window for a specified
time. The session time-out value is configured by your DSView software administrator at the
DS1800 digital switch or DSR switch level using the Appliance Session Settings window. See
Changing Managed Appliance Settings on page 95 for more information.
You may override this value within the DSView Explorer. If you specify a new time-out value, it
will be used the next time the DSView management software is started. See Connecting to an
existing session on page 160 for more information.
Window Features
Figure 6.1 shows the Video Viewer window areas, and descriptions follow in Table 6.1.
Figure 6.1: Video Viewer Window (Normal Window Mode)
B
C
H
D
I
F
E
G
A
To Next Page
Loading...