Chapter 7: Using the Telnet/SSH Applet 199
To change the terminal emulation mode:
1. Select Options - Session Properties from the menu bar.
-or-
Click the Session Settings icon in the toolbar.
The Session Properties dialog box will appear.
2. Click the Terminal tab.
3. From the Terminal Emulation list, choose one option. The default value is VT100. Terminal
Emulation on page 299 contains encoding and decoding information for each of the terminal
emulation types.
NOTE: When connecting to an appliance, the terminal type setting must match the terminal emulation type.
To change the Telnet/SSH applet Arrow key sequences:
When the Terminal Emulation mode is VT100, VT100+, VT102, VT52, VT220 or VT320, you
may specify either VT100 or ANSI
Arrow key sequences. Table 7.3 lists the Arrow keys and the
sequences transmitted for each
1. Select Options - Session Properties from the menu bar.
-or-
Click the Session Settings icon in the toolbar.
The Session Properties dialog box will appear.
2. Click the Terminal tab.
3. In the Arrow Keys list, choose either VT100 or ANSI. The default value is VT100.
To change the terminal type:
1. Select Options - Session Properties from the menu bar.
-or-
Click the Session Settings icon in the toolbar.
Table 7.3: Arrow Key Sequences
Key VT100 ANSI VT52*
Up Arrow <Esc> [A <Esc> OA <Esc> A
Down Arrow <Esc> [B <Esc> OB <Esc> B
Right Arrow <Esc> [C <Esc> OC <Esc> C
Left Arrow <Esc> [D <Esc> OD <Esc> D
* When the Terminal Emulation mode is VT52, the Arrow keys are interpreted as indicated in this column,
regardless of the value in the Arrow Keys list.
To Next Page
Loading...