74 DSView Installer/User Guide
Figure 4.1: Target Devices - All Window
Only the units for which the user has been assigned privileges will display in the content area. Units
will also not display if they are hidden. See Showing and hiding units on page 76 for
more information.
An appliance type will only be listed in the side navigation bar if an appliance of that type has been
added to the DSView software system (and the user has access to it).For example, if no DSR1021
switch, CPS810 appliance or EVR1500 environmental monitor exists on your DSView software
system, these types will not appear under Appliances in the side navigation bar.
Target device types are defined by users. If a type has been assigned to a target device, the type
name will appear under target devices in the side navigation bar. For example, if you assign a type
of Windows 2000 program to three target devices, a Windows 2000 link will appear in the side
navigation bar. Clicking on the link will display the three target devices, as well as any other
existing target devices assigned that type.
Clicking Recently Accessed in the side navigation bar displays a list of appliances that the logged in
user has accessed last. You may also click a link under Sites or a custom field to display a list of
appliances associated with the site or custom field.
Click on an Expand
Node arrow to
expand a link. Use
the Profiles tab -
Options window to
reconfigure the
behavior of the
arrow links.
Click a unit name to change it.
Click the Expand All
Nodes icon in the
upper right corner
of the side
navigation bar to
expand all nodes.
Click the Collapse
All Nodes icon to
collapse all nodes.
To Next Page
Loading...