Avocent DSView - Table D.5: VT100 ANSI Set and Reset Mode Cursor Keys

302 DSView Installer/User Guide
Table D.5 lists the VT100 ANSI mode and cursor keys for set and reset modes. Encoding and
decoding is supported for all the cursor keys listed.
Ctrl+R 12 DC2 Yes/No
Ctrl+S 13 DC3 or XOFF Yes/No
Ctrl+T 14 DO4 Yes/No
Ctrl+U 15 NAK Yes/No
Ctrl+V 16 SYN Yes/No
Ctrl+W 17 ETB Yes/No
Ctrl+X 18 CAN Yes/No
Ctrl+Y 19 EM Yes/No
Ctrl+Z 1A SUB Yes/No
Ctrl+[ 1B Esc Yes/No
Ctrl+\ 1C FS Yes/No
Ctrl+] 1D GS Yes/No
Ctrl+^ 1E RS Yes/No
Ctrl+_ 1F US Yes/No
Table D.5: VT100 ANSI Set and Reset Mode Cursor Keys
Cursor Key Mode Reset Mode Set
Up Esc [ A Esc O A
Down Esc [ B Esc O B
Right Esc [ C Esc O C
Left Esc [ D Esc O D
Table D.4: VT100 Special Keys and Control Keys (Continued)
Keys Hex Code Function Mnemonic Encode/Decode