Avocent DSView - Accessing Target Devices; Table 1.2: Managed Appliance Icons; Table 1.3: Dsview Explorer Window Links

8 DSView Installer/User Guide
When a Units View is displayed, the unit entries often contain icons.
• Target device icons may be changed. See Changing Unit Overview Information on page 86 for
more information.
• The managed appliance icons, which are listed in Figure 1.2, may not be changed.
Accessing target devices
Target devices that may be accessed system-wide are displayed in a Unit Views window. Table 1.3
lists the Action links (connection methods) that may be be used to initiate sessions with a target
device connected to a managed appliance or to display a generic appliance or EVR 1500
environmental monitor.
C
Top navigation bar - The selections in the top navigation bar vary, depending on the active tab in
the tab bar. These options display in the side navigation bar
D
Side navigation bar - Use the side navigation bar to display the system information you wish to
display or edit, which displays in the content area. The side navigation bar also contains icons in
the top left corner which, when clicked, expand or collapse all nodes.
E Content area - Use the content area to display or make changes to the DSView software system.
Table 1.2: Managed Appliance Icons
Icon Description
CPS or CCM appliance
DS1800 digital switch, DSI5100 appliance or DSR switch
EVR1500 environmental monitor
Generic appliance
Table 1.1: DSView Explorer Window Area Descriptions (Continued)
Letter Description
Table 1.3: DSView Explorer Window Links
Clicking this link... That is associated with... Displays...
Browser Session
EVR1500 environmental monitors, generic appliances,
standalone target devices and target devices attached
to DS1800 digital switch, CPS appliance, CCM
appliance or DSR switch channels or ports
Web browser
IPMI Session IPMI 1.5 target devices IPMI Viewer window