Avocent DSView - Figure 4.6: Custom Fields Example: Side Navigation Bar

Chapter 4: Managing Units 135
h. Click Close. The Appliance - All window will open.
4. The configuration of a generic appliance has been verified, so the administrator now wishes to
create a group named Final Configuration that will contain the final test units. The group will
contain one generic appliance managed by Tim Brown.
a. From the Appliances - All window, click on a generic appliance. The Unit Overview
window will open. The side navigation bar will include the name of the generic appliance
at the top and a list of items below it.
b. From the side navigation bar, click Properties.
c. From the side navigation bar, click Custom Fields. The Unit Custom Fields window will
open, including the custom field names you defined in step 1.
d. In the Test Configuration field, type
Final Configuration.
e. In the Appliances and target devices field, type
Generic Appliances.
f. In the DSView software users field, type
Tim Brown.
g. Click Save to save your changes.
h. Click Close. The Appliance - All window will open.
Figure 4.6: Custom Fields Example: Side Navigation Bar
System-wide first-level
custom field label
Unit first-level custom
field labels
Unit second-level custom
field labels