Avocent DSView - Figure 4.2: Shown and Hidden Units in a Recently Accessed Units Window

Chapter 4: Managing Units 77
Figure 4.2: Shown and Hidden Units in a Recently Accessed Units Window
Hiding turns off the display of units in the window, but does not remove the units from your
DSView software system.
To hide a unit:
1. Click Customize in a Unit Views window. The Unit Views Customization window will open.
2. Click Visibility in the Available Fields column and then click Add. Visibility will be moved to
the Fields to Show column.
3. Click Show hidden items if you wish to display hidden units in the Unit Views Customization
window with a transparent icon.
4. Click Save and then click Close. The window will open containing the Visibility column. The
Visibility column will display Hide for each unit.
5. Click Hide for each unit. The display of the selected unit will be turned off in the Unit Views
window if Show hidden items was not selected in the Unit Views Customization window.
-or-
If Show hidden items was selected, the hidden unit will appear with a transparent icon.
Display the Visibility
column by selecting the
Customize link. Change the
show/hide state of a unit by
clicking on Show or Hide.
Hidden items will
appear with a
transparent icon if
Show hidden items
is checked in the
Customize window.