168 DSView Installer/User Guide
• If sharing is enabled for the non-primary user, video settings are read from the DS1800 digital
switch or DSR switch.
See Connecting to an existing session on page 160 for information about session sharing.
Users may verify the level of packets per second required to support a static screen by observing
the packet rate which is located in the lower left-hand corner of the dialog box.
To manually adjust the video quality of the window:
NOTE: The following video adjustments should be made only on the advice and with the help of Avocent
Technical Support.
1. Select Tools - Manual Video Adjust from the Video Viewer window menu.
-or-
Click the Manual Video Adjust button.
The Manual Video Adjust dialog box appears. Figure 6.2 shows the dialog box;
descriptions follow.
2. Click the icon corresponding to the feature you wish to adjust.
3. Move the slider bar and then fine tune the setting by clicking the Min (-) or Max (+) buttons to
adjust the parameter for each icon pressed. The adjustments will display immediately in the
Video Viewer window.
4. When finished, click Close to exit the Manual Video Adjust dialog box.
Figure 6.2: Manual Video Adjust Dialog Box
C
B
I
J
K
M
N
L
To Next Page
Loading...