Avocent DSView - Displaying Video Viewer Users; Saving the View

186 DSView Installer/User Guide
-or-
Click No to cancel the command.
4. Click Close to close the dialog box.
Displaying Video Viewer Users
NOTE: This procedure is not available if the DSR Remote Operations software is being used.
You may select the View - Connected Users command or click the Connected Users button to
display the current users connected to a Video Viewer window session.
To display current Video Viewer users:
1. Select View - Connected Users from the Video Viewer window menu.
-or-
Click the Connected Users button.
The Users Connected to <device - Video Session number> dialog box appears, containing a
list of all users connected to the Video Viewer window session.
2. Click OK to close the dialog box.
Saving the View
The display of a Video Viewer window may be saved to either a file or to the clipboard for pasting
into a word processing or other program.
To capture the Video Viewer window to a file:
1. Select File - Capture to File from the Video Viewer window menu.
-or-
Click the Capture to File button.
The Save As dialog box appears.
2. Enter a filename and choose a location to save the file.
3. Click Save.
To capture the Video Viewer window to your clipboard:
Select File - Capture to Clipboard from the Video Viewer window menu.
-or-
Click the Capture to Clipboard button.
The image data is saved to the clipboard.