Avocent DSView - Displaying Switch Version Information; Exiting Dsr Remote Operations

298 DSView Installer/User Guide
The SPC device socket will power down and the icon for the SPC device socket in the content
area will change.
To cycle the power of an SPC device socket:
1. From the side navigation bar, select Power. A list of SPC device sockets attached to the switch
will appear in the content area.
2. Select an SPC device socket that is powered up and select Tools - Cycle Power from the
menu bar.
-or-
Select an SPC device socket that is powered up and click the Cycle Power toolbar button.
-or-
Right-click on an SPC device socket that is powered up and select Cycle Power from the
shortcut menu.
The SPC device socket is powered down, then powered up and the icon for the SPC device
socket in the content area will change accordingly.
Displaying switch version information
To display switch version information:
From the menu bar, select View - Versions.
-or-
From the side navigation bar, click Version. The versions of the following items will appear in the
content area:
• Application
• Boot
• Digital/Application
• Digital/Hardware
• Hardware
To refresh the Versions view:
From the menu bar when the Versions view is displayed, select View - Refresh.
Exiting DSR Remote Operations
To exit DSR remote operations:
From the menu bar, select File - Exit.