76 DSView Installer/User Guide
Managed appliances that you have recently accessed may also be displayed by clicking Recently
Accessed under Unit Views in the side navigation bar.
To display target devices in the Target Devices window:
From the DSView Explorer, click the Units tab. Units will automatically be selected in the top
navigation bar and Unit Views - Target Devices - All will automatically be selected in the side
navigation bar. The Target Devices - All window is displayed and includes all target devices on
your system.
If any target devices have been assigned a type, the name of each type will display in the side
navigation bar under the target devices. Clicking on a target device type will display only the target
devices assigned to the type.
To display units and SPC devices and outlets in the Topology window:
1. From the DSView Explorer, click the Units tab. Units will automatically be selected in the top
navigation bar and Unit Views - Target Devices - All is automatically selected in the side navi-
gation bar. The Target Devices - All window is displayed.
2. Under Unit Views in the side navigation bar, click Topology. The Topology window will open
with a display of all appliances in addition to SPC devices and outlets in your system.
Showing and hiding units
Figure 4.2 explains some shown and hidden displays window features.
To Next Page
Loading...