48 DSView Installer/User Guide
public key in the certificate that the DSView software server is currently using. This requires
that both certificates be made on the same DSView software server. Go to step 6.
Click Next.
5. The Type in Certificate Information window will open.
a. Type the name of the computer that will serve as the DSView software server on your
intranet in the Common Name field.
-or-
If the DSView software server is outside the intranet, type the server’s full domain name
in dot notation format (xx.xx.xx.xx).
b. Type the name of the organization (or country).
c. Type the name of the organizational division or name under which the organization is
doing business.
d. Type the complete city or location name. The City or Location field is required for
organizations registered only at the local level.
e. Type the complete name of the state or province where the organization is located.
f. Type the two-character ISO country code for the country where the organization
is located.
g. Click Next. Go to step 7.
6. The Select Certificate to Import window will open.
a. Type the full directory and filename for the SSL certificate file you wish to import to the
DSView software server.
-or-
Click the Browse button and specify the SSL certificate file.
The name of the SSL certificate file must be entered in case sensitive text if your
operating system supports case sensitive filenames.
Imported certificates must have been generated from a CSR created on the same DSView
software Server to which you are importing the certificate.
b. Click Next.
7. The Completed Successful window will open.
8. Click Finish. The DSView Server Certificate Properties window will open containing updated
certificate information.
Proxy servers
To specify a proxy server:
NOTE: This procedure is valid for the following managed appliances: DS1800 digital switches, CPS appliances,
CCM appliances and DSR switches.
To Next Page
Loading...