Avocent DSView - Appendix D: Terminal Emulation; Table D.1: VT Key and Keypad Numeric Codes; Vt Terminal Emulation

Appendices 299
Appendix D: Terminal Emulation
This appendix contains information about the keys, sequences, encoding and decoding for the
DSView management software Terminal Emulation modes when using the Telnet/SSH applet
window. Encode refers to how the client interface processes typed keys. Decode refers to how the
client interface processes data coming from the target device.
The Terminal Emulation mode may be set by selecting Options - Session Properties in the Telnet/
SSH applet window and then using the Terminal Emulation drop-down menu in the Session
Properties dialog box. See To change the terminal emulation mode: on page 199 for
more information.
VT terminal emulation
Table D.1 lists the VT key and keypad numeric codes. Avocent encodes all applicable keys as
numeric; decoding is not supported.
Table D.1: VT Key and Keypad Numeric Codes
Key Keypad Numeric Code
00
11
22
33
44
55
66
77
88
99
- (dash) - (dash)
, (comma) , (comma)
. (period) . (period)
Enter Same as Return key