Chapter 5: Managing User Accounts 155
7. Click Close. The User Group - Built-In window will open if you were viewing, assigning or
removing built-in user group members. The User Group - User Defined window will open if
you were viewing, assigning or removing user-defined user group members.
Displaying user group unit access rights
Different built-in and user-defined user groups provide different access rights for units. Access
rights determine which actions you may or may not perform on a unit. You may display the units
that belong to a built-in or user-defined user group and the access rights provided to each by the
built-in or user-defined user group.
Target devices appear in the Target Device Access Rights window, while managed appliances
appear in the Appliance Access Rights window.
Customizing the Unit Access Rights windows
By default, the following columns display in the Target Device Access Rights window and may be
removed by clicking the Customize link:
• Viewer Sessions - Whether a user may open a DSView software session with a target device
using a Video Viewer window.
• Power Control - Whether a target device connected to an SPC device outlet may be powered
up, powered down or have its power cycled.
• VM Sessions - Whether a user may establish virtual media sessions.
• Reserved VM Sessions - Whether a user may establish reserved virtual media sessions.
By default, the following columns display in the Appliance Access Rights window and may be
removed by clicking the Customize link:
• Reboot - Whether a user assigned to the built-in user group may reboot the managed appliance.
• Flash Upgrade - Whether a user assigned to the built-in user group may Flash upgrade the
managed appliance.
• Settings - Whether a user assigned to the built-in user group may configure the settings of the
managed appliance.
• Local Users - Whether a user assigned to the built-in user group may configure the local user
account of a DS1800 digital switch, CPS appliance, CCM appliance or DSR switch.
See Using the Customize link in windows on page 14 for more information.
To display the access rights of a target device in a user group:
1. From the User Groups - Built-in window, click on a user group name.
-or-
From the User Groups - User Defined window, click on a user group name.
The User Group Properties window will open.
2. From the side navigation bar, click Access Rights. Target Devices is automatically selected in
the side navigation bar. A check (
√) will appear in the corresponding column if the access right
To Next Page
Loading...