Avocent DSView - Chapter 9: Using Tools; Using Unit Tools; Rebooting; Upgrading firmware

Chapter 7: Using the Telnet/SSH Applet 213
To power up a target device:
1. Select Options - Power from the Video Viewer main window. The Power Control dialog box
will appear.
2. Click On.
3. Click Close to close the dialog box.
To power down a target device:
1. Select Options - Power from the Video Viewer main window. The Power Control dialog box
will appear.
2. Click Off.
3. Click Close to close the dialog box.
To power cycle a target device:
1. Select Options - Power from the Video Viewer main window. The Power Control dialog box
will appear.
2. Click Cycle.
3. Click Close to close the dialog box.
Closing a Telnet/SSH Applet Session
To close a Telnet/SSH applet session:
Select File - Exit from the Telnet/SSH applet window.