Chapter 9: Using Tools 235
5. Click Open. The file will download and open. By default, .csv files are configured to open in
Microsoft Excel. If Microsoft Excel is not installed on your computer, you will be prompted to
select a text editor to use for opening the .csv file.
NOTE: The default filename of the .csv file is appliance_rights.csv if you are exporting DS1800 digital switch,
DSI5100, CPS and CCM appliance and DSR switch rights or target_device_rights.csv if you are exporting target
device rights. Subsequent files that you export will be incremented (target_device_rights[1].csv,
target_device_rights[2].csv and so on).
-or-
Click Save. The Save As dialog box will appear. Select a directory and filename and click Save
to save the .csv file.
-or-
Click Cancel to cancel the action.
6. Click Finish. The Units Tools window will open.
Merging target devices
Using the Merge Target Devices tool may be necessary if a target device is connected to one or
more managed appliances. For example, if a target device is connected to both a DSR switch and a
CCM appliance, this tool will merge the target devices created when the managed appliances were
added into a single target device that contains all of the target actions.
To merge target devices:
1. From the Units Tools window, click the Merge Target Devices icon or link. The Merge Target
Devices Wizard will appear. Click Next.
2. The Select Target Devices to Merge window will open.
3. Specify the target devices you wish to merge:
a. Select the target devices in the Available Target Devices list. Multiple target devices may
be selected by pressing
Ctrl or Shift while clicking on the target device names.
b. Click Add. The target devices will be moved to the Target Devices to Merge list.
To remove selected target devices, select the target device you wish to remove from the
Target Devices to Merge list (multiple target devices may be selected by pressing
Ctrl or
Shift while clicking on the Target Device names) and clicking Remove. The target devices
will be moved to the Available Target Devices list.
c. To merge target devices in a particular order, select the Target Devices in the Target
Devices to Merge list and use the up and down arrows to move the selected target devices
up or down in the listing. Multiple target devices may be selected by pressing
Ctrl or Shift
while clicking on the target device names. Once the order has been specified, select Merge
missing properties to the target device based on the order of the devices in the “Target
Devices to Merge” list.
To Next Page
Loading...