Chapter 4: Managing Units 131
7. Click Close. The Personal Unit Groups or Global Unit Groups window will open.
Using groups to display and change units
You may change the fields that display in the Units in Group window by clicking on the Customize
link. See Using the Customize link in windows on page 14 for more information.
The Units in Group window allows you to delete, scan and assign rights to all or specific units in a
personal or global group.
NOTE: If a personal or global group does not contain at least one unit, the group will not display in the side
navigation bar.
The side navigation bar links in this window work identically to those selected from a Unit Views
window. See Managing Units on page 86 for more information.
To display a personal or global group in the Units in Group window:
1. From the DSView Explorer, click Units in the tab bar. Units will automatically be selected in
the top navigation bar.
2. From the side navigation bar, click Groups. The Units in Group window will open and display
the first alphabetically-listed personal or global group.
3. From the side navigation bar, click on the name of the personal or global group you wish to
view. A Units in Group window will open containing only the units that have been added to
the group.
Managing units by custom fields
Three custom fields are available. You may change the default custom field labels (Custom Field 1,
Custom Field 2 and Custom Field 3) and then associate units to the custom fields.
Figure 4.5 illustrates the custom field feature.
To Next Page
Loading...