Appendices 297
Managing SPC device sockets
Users with User level account privileges cannot change the power state of SPC device sockets. See
Built-in User Groups on page 18 for more information.
Use the Power view to manage SPC device sockets attached to the switch. See Power view on
page 292 for more information.
To display the Power view:
From the menu bar, select View - Power.
-or-
From the side navigation bar, click Power.
To refresh the Power view:
Select View - Refresh from the menu bar when the Power view is displayed.
To power up an SPC device socket:
1. From the side navigation bar, select Power. A list of SPC device sockets attached to the switch
will appear in the content area.
2. Select an SPC device socket that has not been powered up and select Tools - Power On from
the menu bar.
-or-
Select an SPC device socket that has not been powered up and click the Power On
toolbar button.
-or-
Right-click on an SPC device socket that has not been powered up and select Power On from
the shortcut menu.
The SPC device socket will power up and the icon for the SPC device socket in the content
area will change.
To power down an SPC device socket:
1. From the side navigation bar, select Power. A list of SPC device sockets attached to the switch
will appear in the content area.
2. Select an SPC device socket that has not been powered down and select Tools - Power Off
from the menu bar.
-or-
Select an SPC device socket that has not been powered down and click the Power Off
toolbar button.
-or-
Right-click on an SPC device socket that has not been powered down and select Power Off
from the shortcut menu.
To Next Page
Loading...