Chapter 5: Managing User Accounts 149
Alternatively, if the user administrators group was not going to be assigned access rights to the
DSR1021 switch, access rights could be added for only the user johnsmith.
See Adding User Accounts on page 141, Managing User-Defined User Groups on page 150 and
Changing Unit Access Rights on page 91 for more information.
Customizing Appliance and Target Device Access Rights windows
By default, the Name field is always displayed in the target device Access Rights window. The
following fields also display and may be removed by clicking the Customize link:
• Viewer Sessions - Specifies whether the user may display KVM sessions using a Video
Viewer window or Serial sessions using a Telnet/SSH applet window.
• Power Control - Specifies whether the user may control the power of the target device if it is
connected to an SPC device outlet.
• VM Sessions - Specifies whether the user may establish virtual media sessions.
• Reserved VM Sessions - Specifies whether the user may establish reserved virtual
media sessions.
By default, the Name field is always displayed in the Appliance Access Rights window. The
following fields also display and may be removed by clicking the Customize link:
• Reboot - Specifies whether the user may reboot the DS1800 digital switch, CPS appliance,
CCM appliance or DSR switch. See Rebooting on page 240 for more information.
• Flash Upgrade - Specifies whether the user may Flash upgrade the DS1800 digital switch, CPS
appliance, CCM appliance or DSR switch. See To update the firmware of specific appliances
of a specific type to DSView software compatibility on page 465 for more information.
• Settings - Specifies whether the user may change the appliance settings of the DS1800 digital
switch, CPS appliance, CCM appliance or DSR switch. See Changing Managed Appliance
Settings on page 95 for more information.
• Local Users - Specifies whether the user may manage local accounts on the DS1800 digital
switch, CPS appliance, CCM appliance or DSR switch. See Changing local account settings
on page 114 for more information.
See Using the Customize link in windows on page 14 for more information.
.To display a user’s access rights to a target device:
1. From the side navigation bar, click Access Rights.
2. From the side navigation bar, click Target Devices. The target device Access Rights window
will open
• If a black check mark appears, the user has the right to perform the corresponding action.
• If a grey check mark appears, a group to which the user belongs has the right to perform
the corresponding action.
To Next Page
Loading...