152 DSView Installer/User Guide
a. Type the name for the new user group you wish to create. User-defined user group names
may contain up to 64 non-case sensitive characters. User-defined user group names
are case-preserving.
b. Click Next.
Go to step 7.
4. The Specify External Group Name window will open.
a. Click Import Everyone to consider any user on the external authentication server as a
member of this user group.
-or-
Click Specify a group on external authentication service and type the name of the group in
the field. User group names may contain up to 64 non-case sensitive characters. User
group names are case-preserving if the user group on the external authentication server is
case sensitive.
-or-
Click Find a group on external authentication service to browse a list of groups on the
external authentication service.
b. Click Next.
If you selected Find a group on external authentication service, continue to step 5.
-or-
If you selected Specify a group on external authentication service, go to step 6.
5. The Select Group from External Authentication Service window displays. If the list of groups
contains more than 5000 entries, a message will indicate that not all items are displayed.
a. Select a group from the list. You may filter the list by using the Filter button and the
adjacent text field. See Filtering information in a window on page 12 for
more information.
b. Click Next.
6. The Select Role window will open.
a. Select one of the following roles for the user group: None, User, Auditor, Appliance
Administrator, User Administrator or DSView software administrator. (See Built-in User
Groups on page 18 for information about user roles.)
b. Click Next.
7. The Select User Group Preemption Level window will open.
a. Type a preemption level (from 1-4) in the field, or select it using the drop-down menu. See
Preemption Levels on page 20 for more information.
b. Click Next.
8. The Completed Successful window will open. Click Finish. The user group has been added.
To Next Page
Loading...