Chapter 6: Using the Video Viewer 181
• Select Global to display global macros only.
3. Select the desired macro from the Defined Macros list and then click Delete. You are prompted
to confirm the deletion.
4. Click Yes to confirm the deletion.
-or-
Click No to cancel the deletion.
5. Click Close to exit the Macros dialog box.
To copy a macro:
NOTE: Macros cannot be copied if you are using the DSR Remote Operations software.
1. Select Macros - Configure - Macros from the Video Viewer window menu.
-or-
Click the Macros button.
The Macros dialog box appears.
2. Select one of the following:
• Select All to display both personal and global macros.
• Select Personal to display personal macros only.
• Select Global to display global macros only.
3. Select the desired macro from the Defined Macros list and then click Copy. The Copy Macro
dialog box will appear.
4. Type a 1-32 character name in the Name of copied macro field.
5. Select whether you wish to make the copied macro a personal or global macro from the Macro
Type area.
6. Click OK to copy the macro. The Copy Macro dialog box is closed and the copied macro will
appear in the Macros dialog box.
-or-
Click Cancel to cancel the action.
7. Click Close to exit the Macros dialog box.
To create a macro group:
NOTE: Macro groups cannot be created if you are using the DSR Remote Operations software.
1. Select Macros - Configure - Macro Groups from the Video Viewer window menu.
-or-
Click the Macro Groups button.
The Macro Groups dialog box appears.
2. Click Create. The Create/Edit Macro Group dialog box will appear.
To Next Page
Loading...