BASIC OPERATION
18
4.5 System Sources Reallocation (For 4CH Models Only)
Go to “QUICK START” “GENERAL”, and select “PRIORITY” to reallocate the system
sources to live display and record.
There are two options for this function: RECORD FIRST / DISPLAY FIRST / NETWORK
FIRST.
QUICK START
GENERAL
RECORD CONFIG SETUP
EXIT
RECORD FIRST: When this option is selected, Full D1 at real-time record on all
channels is available, and the VGA output resolution is fixed to
1024 x 768.
DISPLAY FIRST: When this option is selected, three VGA output resolutions will be
available to choose), but Full D1 real-time recording on all
channels will not be available.
For models supporting HD video output, the options are
AUTO (default) / 1024 x 768 / 1920 x 1080.
For others, the options are 1024 x 768 / 1280 x 1024 / 1600 x 1200.
NETWORK FIRST: When this option is selected, real-time remote monitoring will be
available, but Full D1 real-time recording on all channels will not
be available, and the VGA output resolution is fixed to 1024 x 768.
To Next Page
Loading...
Need help?
General
