CONNECTION AND SETUP
5
Step3: Fasten the hard disk to the bracket by securing the screw on the bracket.
CR2032
Hard Disk
Step4: Replace the top cover and fasten the screws you loosened in Step1.
Type 2
Note: Here takes an 8CH model as an example of how to connect a hard disk to your device. To know
how many hard disks could be installed, please refer to the specifications of your device.
Step1: Remove the top cover, and find where to install a hard disk.
CR2032
Screw hole for
fastening hard disk
Step2: Get a compatible hard disk. With the PCB side facing down, find the screw holes on the DVR base, and place
the hard disk in the DVR.
Note: To use a green hard disk, use ONLY the hard disk designed especially for surveillance to ensure the
device works properly.
H
a
r
d
D
i
s
k
S
c
r
e
w
h
o
l
e
S
c
r
e
w
h
o
l
e
To Next Page
Loading...
