2010/MAY/17 BACKUP DAY EXIT
6.4.10 NOTIFY
You can configure this DVR to send notifications for certain events to mobile devices with our mobile app,
EagleEyes, installed, or to the specified E-mail address(es) or FTP site.
PUSH VIDEO
Note: This function is for selected models only.
Before using this function, make sure:
An external alarm is connected to the alarm-in port on the rear panel.
You have an iOS or Android mobile phone or tablet.
You have subscribed the mobile network service from your mobile service provider.
The mobile app, EagleEyes, is installed in your mobile device. For details, please refer to “7.2 Mobile Devices” at page 57.
You have configured EagleEyes to access this DVR, and “Guard” is enabled. For details, please refer to “APPENDIX 3 SET PUSH
VIDEO” at page 67.
You’ll get an active event notification with video telling you the occurrence of alarm event(s).
ADVANCED CONFIG
CANERA
PUSH VIDEO
NETWORK
CH01 ALARM OFF / INTERNAL ALARM CH1
DISPLAY
CH02 ALARM OFF CH2
RECORD
CH03 ALARM N.O. office
DEVICES
CH04 ALARM OFF CH4
DCCS
IVS
NOTIFY
EXIT
1) RESET ALL GUARD CONNECTION
When there’re more than 2 users who have the authority to enable Push Video on their mobile devices and
configure its related settings, it might be confusing to know whose command is working. In this case, use this
function could force the camera to discard all Push Video setup and reconfigure it.
To Next Page
Loading...
