DETECTION INTERFACE COAXIAL
ALERT BRIGHTNESS 128
NETWORK CONTRAST 128
DISPLAY SATURATION 128
RECORD HUE 128
DEVICES REC ON
DCCS TIME STAMP DISPLAY ON
IVS CHANNEL TITLE CH1
NOTIFY REC AUDIO ON
ALARM OUT DURATION (SECS) (For selected models only) 3
CAMERA PARAMETERS UPGRADE UPGRADE
EXIT
1) BRIGHTNESS / CONTRAST / SATURATION / HUE
Click the current value to manually adjust the brightness/contrast/saturation/hue of each channel here.
2) REC
Select if you want to enable recording for the selected channel (ON / OFF).
Note: When this function is disabled, no manual, event or timer recording will be activated even if any
of these three record functions is set to “ON”.
3) TIME STAMP DISPLAY
Enable this function and the recording time will be shown on the video during video playback.
4) CHANNEL TITLE
Click the channel title column to change the channel title (up to 12 characters). The default title is the
channel number.
5) REC AUDIO
Enable or disable audio recording for the selected channel if the connected camera supports audio
recording.
6) ALARM OUT DURATION (SECS) (For selected models only)
Select the duration time in second when an alarm-out event occurs (3 / 5 / 10 / 20 / 30).
7) CAMERA PARAMETERS UPGRADE
This function is used only to upgrade our brand’s HD CCTV camera.
Get the upgrade file from our installer or distributor and save it to a USB flash drive. Then, select
“UPGRADE” to start upgrade the camera parameters.
To Next Page
Loading...
