MAIN MENU
46
2) GUARD TRIGGER BY
Specify which alarm device (alarm-in) should be used when GUARD is enabled from your iOS or Android
mobile device.
3) ALARM TYPE
Select the external alarm type to “ALARM NO.”, “ALARM N.C.” and “INTERNAL ALARM”.
4) CH01 ~ 04
Enter the text you want to see when your iOS or Android mobile device receives Push Video. The default
text is the channel number.
PUSH STATUS
Before using this function, make sure:
You have an iOS or Android mobile phone or tablet.
You have subscribed the mobile network service from your mobile service provider.
The mobile app, EagleEyes, is installed in your mobile device. For details, please refer to “7.2 Mobile Devices” at page 57.
You have configured EagleEyes to access this DVR, and “Guard” is enabled. For details, please refer to “APPENDIX 3 SET PUSH
VIDEO” at page 67.
You’ll get a text message telling you the occurrence of selected system event(s).
ADVANCED CONFIG
CANERA
PUSH VIDEO PUSH STATUS MESSAGE MAIL
SYSTEM ABNORMAL
EXIT
Step1: Switch “ACTION” to “ON”.
Step2: Select the system event(s) you want to get notified via your mobile device.
Step3: Enable “GUARD” in EagleEyes on your mobile device, and try to trigger a system event to see if you’ll get
Push Status.
To Next Page
Loading...
