From this level of the menu, you choose which output that you like to customize.
3.2.1 ANALOG & DIGITAL outputs.
From this level of MENU, you can customize the main outputs. By this section you can select the main output source type, gain and mode.
It’s also able to adjusting the audio output level by the GAIN knob. The gain has steps of 0.1 dB. The audio output GAIN range goes from -6 dB to
6 dB. From MODE can select the output type like STEREO, MONO, MONO LEFT or MONO RIGHT.
N.B .: When the parameter control is activated, in real time the parameter value is updated, perceiving the increase and decrease of the GAIN,
the graphics will change from yellow to white until the parameter is confirmed.
To Next Page
Loading...
Need help?
General
