CUT / ON AIR:
From this function, you can assign the MIC to a cut source that has to but the SPEAKERS in mute (CR ROOM or STUDIO). This option allows the MULTIPLE
SELECTION, it is possible to select one source (CR ROOM, STUDIO) or both of them.
The opening of a microphone source (if configured appropriately) can generate the closing command of the loudspeakers.
That is possible to choose one or more source to cut the loudspeaker.
When you open the associated source with a CUT /On-Air function, you will see it’s will MUTE CR Loudspeakers output and the SPEAKER icon at
LCD will start plinking.
To Next Page
Loading...
Need help?
General
