2.5 MONITORS SECTION
A. CONTROL ROOM SPEAKERS SOURCES & LEVEL – CUT FUNCTION
- This section is used for the management of the Control Room Speakers.
- The rotary control knobs allow you to amplify/attenuate the selected signal in the Speakers.
- The loudspeakers audio level goes from 0 to 99. 99 is the maximum allowed level.
- The step of the loudspeakers adjustment is 1 dB and the level goes from -80 dB to the maximum of
+19dB.
- By setting the level on 80 dB we will have a total output level of 0dB.
- The Speakers level are displayed in the bottom-right section of LCD.
To Next Page
Loading...
Need help?
General
