EQ:
These are graphic equalizers that provide an adjustable band between 22.4 Hz and 20 kHz. A master volume slider compensates for
changes in volume caused by the equalization. An equalizer allows the sound in specified frequency bands to be amplified or reduced, in
order to adjust the quality and character of the sound. A maximum boost or cut of is available for LOW CUT and HI-CUT.
Press the Equalizer knob to engage in this section. Select one of the 7 frequency bands with the LOW CUT, BASS, BASS-MID, MID, MID-
HIGH, HIGH and HI-CUT.
Press the next button (
) or ( ) to switch between the pages of EQ types are available.
Select the specific frequency to be adjusted with the FREQUENCY knob, and adjust the bandwidth of the EQ with the Q knob, also you
can choose between PEAK or SHELVING of BASS and HIGH. Finally, boost or cut the selected frequency with the Gain knob.
After confirming any editing you will see clearly the change that you do it at the graphic equalizer display with different colour signals, as
well it’s effective at the input source quality and character.
To Next Page
Loading...
Need help?
General
