ENGINEERING DOCUMENTATION 3
_____________________________________________________________________________________________
1 General information
The Se-01 meter is the ready subassembly, designed for single- or double-range
balances, using the extensometer force sensors.
The meter is used in few types, differing in housing structure and displays size:
- SE-01/A/18 – OSA aluminium housing, powder coated, displays 18 mm (LED)
or 14 mm (LCD)
- SE-01/N/18 – OSN stainless steel housings, hermetic (IP65), displays 18 mm
(LED) or 14 mm (LCD)
- SE-01/N/25 – ODN stainless steel housing, hermetic (IP65), displays 25 mm
(LED) or 14 mm (LCD)
As a standard, the SE-01/A/18 is a subassembly of platform B series balances, the
SE-01/N/18 – of stainless and hermetic balances, the SE-01/N/25 – of platform 4B
balances produced by AXIS.
Each meter has the set of special functions: automatic zeroing, pieces counting,
comparing with threshold values, etc., which may be available for the user or not –
according to the order.
In the further manual part the SE-01 meter operation is described, as the part of
complete balance.
2 Certificates
Test certificate of SE-01 indicator (No PL CB 1) was issued by Main Office for
Measurements in Warsaw (Notified Body No 1440).
SE-01/N/18(25) indicators are of IP65 protection class, confirmed with the
research carried out by The Research Laboratory of The Electrotechnology
Institute in Gdańsk, accredited by Polish Centre for Accreditation.
The indicator may be used as a base for scales conforming EN 45501 Metrological
aspects of non-automatic weighing instruments harmonized with the Council
Directive 90/384/EEC amended with 93/68/EEC.
NACE Classification: 29.24.23.
3 Completeness
A standard set consists of:
1. SE-01 indicator
2. Ferrit TN/20/10/7-3C90– 1 pcs
3. Ferrit TN/16/9,6/6,3-3E27 – 2 pcs
4. RS232C connector (option with RS232C, indicator SE-01/N/18 and 25)
5. SE-01 indicator engineering documentation
6. Guarantee card
7. Mounting guide (on demand)
To Next Page
Loading...
Need help?
General
