Axis SE-01 User Manual

46 ENGINEERING DOCUMENTATION
_____________________________________________________________________________________________
12.21 Automatic switching off the scale function (AutoOF)
The function is helpful in scales supplied from accumulator. The function causes
scale to switch off automatically after c.a. 10 minutes of not using it. Switching
function on causes last entered zero and tare values are remembered in scale
memory. After next start-up of the scale these values are restored.
Press MENU key.
When AutoOF is displayed press → T ←
key.
The following options appear
successively on display:
Auto-0 – activate function,
Auto-1 – deactivate function.
After function activation scale will
control changes of its indications. If the
scale will not be used and scale
indications will not be changing, after
time of c.a. 10 minutes the scale will
switch off remembering its settings
(zero and tare).
Switching on the scale is performed
after pressing I/ key.
10 min.
0.00
0.00
AutoOF
Auto -1
T
T

Axis SE-01 Specifications

General

Brand	Axis
Model	SE-01
Category	Measuring Instruments
Language	English