ENGINEERING DOCUMENTATION 35
_____________________________________________________________________________________________
12.13 Function for weighing large animals (LOC)
The function allows weighing animal moving on the scale.
Press MENU key.
When LOC function is displayed press
→
T
←
key.
The following options appear on
display successively:
- LOC-0 – leave the function,
- LOC-1 – automatic weighing after
loading the scale,
- LOC-2 – the measurement initiated
manually by pressing key.
When LOC-1F..-1 is displayed press
→
T
←
key.
Tare the scale using
→
T
←
key if
necessary and place the animal on the
pan.
Wait until the weighing result is
averaged – scale display will be
blinking. Then scale will show stable
averaged result and will send it through
serial port. Final result is displayed on
the display and send via serial port to
computer or printer.
The result remains on display for about
30 second.
Important notes:
1. The loads less than Min are not averaged.
2. In the case when placing the animal takes more than 5s, it is advised to use
LOC-2 option (measurement initiated manually). It will allow performing
measurement in right moment pressing key.
LOC
0.25
0.25
PrInt
To Next Page
Loading...
Need help?
General
