32 ENGINEERING DOCUMENTATION
_____________________________________________________________________________________________
12.10 Anti-disturbance filter function (FILtEr)
This function allows using digital filter
with selected intensivity during
weighing. Filter reduces the influence
of mechanical vibrations (air blasts,
base vibrations) on measurement result.
Press MENU key and select FILtEr
pressing
→
T
←
key.
The following options will be shown
successively on display:
- FIL-0 – work without
- FIL-1 - filter I (weak)
- FIL-2 - filter II (medium)
- FIL-3 - filter III (sharp)
- FIL-4 - filter IV (very sharp)
Select on of four filters. This will cause
starting weighing with selected filter.
In order to go back to normal weighing
use MENU key once more and choose
FILtEr and FIL-0.
To Next Page
Loading...
Need help?
General
