Axis SE-01 User Manual

48 ENGINEERING DOCUMENTATION
_____________________________________________________________________________________________
If a printer is connected to the scale, printout of solid density measurement results
will be performed in the following form:
It is recommended to use pan hanging below balance, weighing in the air and in
liquid is performed then in the following way.
Phase I: measurement in the air.
Phase II: measurement in liquid.
Date: ... Time. ...
MEASUREMENT No. =
WEIGHT in air = g
WEIGHT in liquid = g
HANGER WEIGHT = g
LOAD DENSITY = g/cm
3
LIQUID DENSITY = g/cm
3

Axis SE-01 Specifications

General

Brand	Axis
Model	SE-01
Category	Measuring Instruments
Language	English