23
① Press TV/AUX( ) + OK( ) buttons for 3 seconds, then the TV
Power( ) button will turns on.
② With the TV Power( ) button turns on, press the or
button until TV turns off.
③ After TV turned off, press the OK( ) button.
④ The TV Power( ) button will blinks three times, and configuration
is done.
1.5.1.2 TV configuration number search
(ID Recall)
① Press TV/AUX( ) + OK( ) buttons for 3 seconds, Then the
TV Power( ) button will turns on.
② With the TV Power( ) button turned-on, if the Info( )
button is pressed, saved numbers in RCU can be verified with
blinking the TV Power( ) button.
③ The button will quickly blink five times, and configuration is
done.
1.5.1.3 TV List
Please refer to the TV List and TV codes in 7. Appendix B. TV Brand
List.
To Next Page
Loading...
