35
NOTE
- Your receiver, as any electronic equipment, is power consuming. In
order to reduce power consumption, please switch your receiver to
standby whenever you are not using it.
- For saving energy compared to the stand by mode, if you are not
using your receiver for a longer period of time, we recommend to
switch off the receiver by unplugging it from the mains.
2.4.1. Powering on and checking picture
After a few seconds you may see a picture displaying a menu. If you do
not see a picture, try pressing the Resolution ( ) button on the
remote control. If after several tries you still get no picture, check that
the television is set to the correct input.
To Next Page
Loading...
