49
server assigns these parameters.
To apply DHCP,
1. In IP setting option, choose DHCP IP and press the OK ( ) button.
2. Select the setup below to apply the configuration.
Static IP: The system’s IP-address, IP-subnet mask and Gateway must
be specified in the IP-address.
To apply Static IP,
1. In IP setting option, choose Static IP and press the OK( ) button..
2. Input information IP address, subnet, gateway, DNS1 and DNS2
3. Select the setup below to apply the configuration.
3.5.3. Speed Check
You can check the speed of your current internet connection here.
To Next Page
Loading...
