58
NOTE
A minimum level of stable signal Quality is required to be able to search
and view the channels.
3.8.1.1. Satellite Name
1. Select the satellite you want to program. Scroll through the various
satellite using the Navigation ( ) buttons and select
the appropriate satellite by press the OK ( ) button.
2. When you select the satellite by pressing the OK ( ) button, the
satellite will be selected and that satellite’s default parameters will
appear.
3. You can adjust the LNB Frequency, DiSEqC, 22KHZ Tone, 0/12V
Switch, LNB Power, TP Frequency, Positioner Setup and Network
Search. The displayed information can be adjusted for each selected
satellite.
To Next Page
Loading...
