6
Safety Precautions
Please read carefully the following safety precautions.
① The mains power must be 90 to 250 volts. Check it before
connecting the digital receiver to the mains socket. For the power
consumption of the digital receiver, see 6.1.
② The mains socket should be near the equipment. Do not run an
extension lead to the unit.
③ Do not expose the digital receiver to any moisture. The digital
receiver is designed for use indoors only. Use dry cloth when
cleaning the digital receiver.
④ Place the digital receiver on a firm and level surface.
⑤ Do not place the digital receiver close to heat emitting units or in
direct sunlight, as this will impair cooling. Do not lay any objects
such as magazines on the digital receiver. When placed in a
cabinet, make sure there is a minimum space of 10 centimeters
around it. For the physical specification of the digital receiver, see
6.1.
⑥ Protect the power cord from being walked on or pinched. If the
cord is damaged, do not use the digital receiver and get the cord
replaced.
⑦ Never open the digital receiver casing under any circumstances,
or the warranty will be void.
⑧ Refer all servicing to a qualified service technician.
To Next Page
Loading...
