55
3.7.6. Default Audio Format
You can choose the default audio format: AC3 or off. The default setting
is Off.
3.7.7. Audio Output
You can choose the audio output: Stereo, Left (Mono) or Right (Mono).
Basically, there are two audio sources as you can find two audio sockets
on the back panel of the digital receiver. You can enjoy only one source
or both of them in either Stereo, Left (Mono), and Right (Mono). Set the
Sound Output option as you desire. The default setting is Stereo.
3.7.8. Dolby Output
The digital receiver can output two types of digital audio signals via the
S/PDIF connector. One is an encoded signal, and the other is a decoded
signal. If your digital audio system does not have a Dolby Digital
decoder, you have to set the Dolby Output option to Uncompressed.
Otherwise, set it to Compressed. The default setting is Uncompressed.
NOTE
If the service you are currently watching does not provide Dolby digital,
you cannot watch the program with Dolby sound even though you set
the Dolby Output option to Compressed.
To Next Page
Loading...
