62
the OK ( ) button. To clear a saved satellite position, select satellite
then choose Resetting from the Command Mode and press the OK ( )
button.
Setting and enabling East and West limits that the dish can move to is
done.
Setting East Limit: Move the dish to the most eastern position and
press the OK ( ) button to store it.
Setting West Limit: Move the dish to the most western position and
press the OK ( ) button to store it.
The Limit options are only active if you select Enabling Limits. They are
not active if you select disable Limits.
NOTE
Limits do not need to be set if you have no obstacles or barriers
preventing your dish from the full range of the motor.
To Next Page
Loading...
